Atlas-R Ti
The RD Atlas-R is a Titanium 1.375x24, Bravo or “HUB” Compatible Suppressor Adapter we designed to accept our RF muzzle devices, Rearden and other Plan-B Compatible Muzzle Devices.
Will this fit my suppressor? Suppressor Mount Compatibility Chart
Weighing in at at just 1.52oz, the Atlas-R Ti is a lightweight and low profile silencer adapter that utilizes our Patent-Pending Castle-Lock™ Design, utilizing TDP Spec Castle Nut Notches for ease of installation and removal using common tools such as an Armorers Wrench or castle-nut wrench. Once installed, the Atlas-R can accept our RF Muzzle Devices, Rearden and other Plan B Compatible Muzzle Devices for a complete suppressor mounting system that eliminates unnecessary weight and length from the front of your rifle.
Features
Suppressor Mount
The Atlas-R, once properly installed into your silencer can accept a multitude of muzzle devices including our RF Muzzle Devices, Rearden and other Plan B Compatible Muzzle Devices. This suppressor mounting system utilizes a taper and threads to ensure a proper seal that is repeatable and reliable without adding unnecessary weight or length to the system. The taper requires about 20% more force to remove than to install.
Castle-Lock™
Patent Pending. The Castle-Lock System utilizes a combination of TDP Spec Castle Nut Notches along with (4) 1 5/16” wrench flats around the circumference give the end user the ability to apply accurate torque values during installation and the ability to utilize common tools for installation and removal. Underneath each wrench flat, we also incorporated a flat section before the chamfered edge to allow for a solid lockup when using a crescent or crowfoot wrench on the Atlas-R.
Chamfered Edges
A design suggestion from our friend Roger Wang at Forward Controls Design, the Atlas-R features chamfered edges on both the circumference of the device along with on top of the notches portion to reduce/remove and snag points. This can be extremely helpful if you store your sling in a slightly forward position or when wearing any sort of clothing/kit that has bulk to it.
Nitride Finish
The Nitriding process greatly increases the surface hardness of the muzzle device while lending itself to a tighter seal in the suppressor itself.
What’s Included
1x Atlas-R 1.375x24 Suppressor Adapter
1x Rocksett Packet
Specifications
- Muzzle Device Compatibility: RF, Rearden and Plan B Muzzle Devices
- Castle Lock™ - TDP Spec Castle Nut Notches for use with Armorers Wrenches/Castle Nut Wrenches
- Chamfered edges to remove snag points
- Material: Titanium - PVD & S-Line Coated
- Weight: 1.52oz
- Wrench Flats: 1 5/16”
- Bravo (1.375x 24) / “HUB” Compatible
- Length Added to Suppressor: 0.5”
- 1.5” External Diameter
- Same OAL as standard Rearden Atlas
- Manufactured for Revival Defense by Rearden Manufacturing
- Proudly Designed and Manufactured in the USA
Installation
- Thoroughly clean all surfaces of debris and oils
- Secure Suppressor in a vice
- Apply a small amount of Rocksett to Atlas-R Threads and install on to suppressor
- Apply appropriate torque value to Atlas-R using a Torque Wrench
- Allow Rocksett to cure for 24 hours before use
*contact your suppressor manufacturer for recommended torque value
